1/2" Dia. Carbide End Mill, 5 Flute, TiAlN Coated, 1/2" Weldon Shank x 1-1/4" LOC, Square Profile, HSPM2

Overview
Gallery

TECHNICAL DOCUMENTS

ISO MATERIAL CHART

P - STEEL
M - STAINLESS STEEL
K - CAST IRON
N - ALUMINUM & NON-FERROUS
S - HIGH TEMP ALLOYS
H - HARDENED METALS

- PRIMARY WORKPIECE MATERIAL

- SECONDARY WORKPIECE MATERIAL

*If Empty, material is not applicable

Technical Specs

System of Measurement	Inch - ANSI
[ØDC] Cutting Diameter	0.5 in \ 1/2"
Haas Milling Series	HSPM2
Primary Workpiece Material	S - High Temp Alloys, P - Steel, M - Stainless Steel
Secondary Workpiece Material	K - Cast Iron, H - Hardened Materials
Material	Carbide
Coating	Multi-Layer TiAlN
Corner Type	Square
Shank Type	Weldon
[ØDMM] Shank Diameter	0.5 in
[LOC] Length Of Cut	1.25 in
[OAL] Overall Length	3.0 in
[NOF] Number of Flutes	5
[FHA°] Helix Angle	38
Cutting Direction	Right
Center Cutting	Yes
Variable Pitch	Yes
Through Spindle Coolant	No
Weight	0.4 lbs \ 0.2 kg
Country of Origin	South Korea

WARNING - www.P65Warnings.ca.gov

Average Customer Ratings:

5.0

Total Reviews: 41

Jerrett Caseltine

02/26/2025

Great Quality

Used these on some pre hardened tool steel and they cut like butter. I got two cutters for the price of one through my tooling supplier. Highly recommend.

Bill

02/20/2025

Great 5-Flute

This is our go to end mill for ferrous metals. We use it in both our VF2SS and on a live tool head in an ST25Y. Works great in both applications.

Mike T

02/11/2025

Great All Arounder

This is a stock tool for us and a go to on all steel and stainless application

Joe

01/31/2025

Great endmill

great endmill for use with stainless, and speeds and feed chart are linked like to the items page for quick access.

Patrick McEwen

11/11/2024

Cheap and effective

Where else can you buy a quality 5 flute endmill for under $40? I have been cutting tool steel with these mills, and they work well.

Clay Bapst

10/18/2024

Great Cutter

Great mill for the price. I have put several cutting hours on the same tool and it just wont quit!

Joe

09/09/2024

Excellent End Mill

Comparable to the KennaMetal in quality but far superior in economical pricing.

Baylor R

08/16/2024

High quality for a low price

Will purchase these again

AMP

08/15/2024

Excellent part @ a great price.

Works as well as or better than other brands for a better price.

Augie D

06/12/2024

Great Item

Great item. Will purchase more

Kelly Gaskins

04/16/2024

Almost to good to be true.

For the price they can not be beat. anywhere

Pete Gutowski

03/27/2024

Awesome End Mills

Great end mills. They out perform the more expensive brand names. These will be the only end mills we buy from now on.

John F

03/26/2024

Great End Mill

These are great end mills and hold up well. Great price as well.

Blake Fulton

03/15/2024

Great Cutter

definitely one of the best cutters I've used and at a great price.

Joe

02/27/2024

Works Great in Stainless

Bought this for a job running 304 SS and was very happy with performance and tool life

Andrew Poet

02/15/2024

Extremely high feedrates

I have been able to push the SFM to over double the recommended values in 304 stainless with good tool life. These tools have been very impressive for the price.

ismael

02/14/2024

very good quality

I have tried different brands for 5 flutes ,but this is the best and for the price even better

Don Delay

01/08/2024

Great Endmill

I use a lot of Helical 5 flute 1/2" end mills. The HSPM2 worked just as well if not better and its almost half the price. Great Deal!

Chuck and Arbor LLC

01/04/2024

Great Value & Performance

I used this cutter full depth with a .030 radial and roughed in 316 Stainless for almost an hour. Afterward, I checked the cutter for any visible signs of wear and could find none! I am more than pleased with my purchase and will definitely buy again.

Luna Manufacturing

12/11/2023

Excellent end mill for stainless and other hard metals

This tool was fantastic, it cut through 303 no problem and the harmonics were great with very little sound coming from my machine. I followed the recommended speeds and feeds and got great surface finish, would highly recommend this tool

JEFF HUGHES

11/06/2023

GOOD FOR THE PRICE

Amazing tool at an amazing price. Great finish in Stainless

Cody Bollinger

10/25/2023

Great finish

I use these in 316 ss and it leaves a flawless finish, for the price they last a while and don’t disappoint

Shea Manufacturing Inc

06/13/2023

A great go-to

We always keep these on-hand and can't fret at the pricing either.

Josh Welch

04/12/2023

Excellent Quality

The product was great, and the quality was great. Everything was exactly as advertised.

Kyra Pearson

11/29/2022

Exactly as advertised!

There isn't much to say really, it's a carbide cutter and everything is exactly as advertised. And it is a a very reasonable price. We definitely recommend it!

Cory Myers

09/26/2022

Great Quality Endmill

Been using these endmills in a variety of different steels from 1018 to A2. Even hard mill dowel holes with a RC of 60

Saul Pena

05/25/2022

Priced right and cuts consistently

We have been cutting 304 stainless and these end mills are holding up and they are priced vastly lower then other end mills saving us money and time.

Jeff

05/17/2022

Excellent!

Our go-to for finishing 1018 and stainless. Would be 5 stars if it didn't have the flat.

Taylor

04/16/2022

Great endmill for the price

Endmill had no problem tearing through 4130 or 4140 using a dynamic milling path. Pleasantly surprised to see the low spindle power usage while roughing on a MiniMill. 4000 RPM, 60 IPM, 1" depth, and 15% stepover ran smooth and cool, while keeping the tool in good enough shape for finishing as well.

Tim Dobson

03/28/2022

Great tool at a great price!

This tool has saved us money in two ways: 1. It is at a lower cost than the competition and 2. It has increased our feeds tremendously, decreasing total cycle times.

Drew C

02/27/2022

Great Value

The quality is as good as ones costing twice the price so this end mill is a great value

Dylan McAuliffe

11/03/2021

High quality, low cost

Excellent feed rates with this 5 flute and very easy to dial in desired finishes. Paired with the price, the performance is really tough to beat.

Paul Cooper

10/15/2021

Nice quality end mills!

We were pleased with the performance of these end mills using them for the first time. So far they have done everything we've asked of them and are continuing to cut well after hundreds of parts. The coating seems very nice and is withstanding lots of abuse. They're priced well and we're putting together another order for more.

SES CNC Inc

09/23/2021

31% Savings With 20% Increase In Performance!!

We bought these endmills because of the good experience with other Haas Tools. The title review says it all! The savings percentages were before Haas Tools dropped their prices. The new calculation is a 55% savings on tooling. We are saving on the cutters and we are getting a better performing tool means we will buying a lot more of these in the future!!

Jeff Brust

08/30/2021

Nice price point and great tool.

Was hesitant at first because of the price point. But after using and testing these run as well as SGS and Niagara.

James Nunn

05/25/2021

Great quality

Haas tools are great quality and great prices. If we quote a job and Haas has the tooling needed, then we order from them - there's no more quoting 3 different places. All their tooling holds up a lot better than most and the ordering and shipping is easy.

brian jimenez

05/19/2021

10 OUT OF 10 WOULD BUY AGAIN

very impressed with the performance. cant beat the price either

Jared Scaggs

05/18/2021

Amazing Value and Quality!

These end mills have saved me a ton of $$ on a large Stainless Steel project, I was able to buy twice as many Haas end mills compared to my previous supplier. Quality is easily equivalent or better! I'll buy more!

Rick Fobear

04/20/2021

Best End mills!

These High Performance end mills are great for cutting Inco 718 and other high nickel alloys. They wear better than all other end mills we have used the last 15 years. They are also we constiant when changing to a new tool. We only use HAAS end mills now.

Precision CAD and CAM

04/05/2021

Excellent Rougher / Finisher

This end mill produces excellent finishes in Stainless Steel and is a rapid rougher. Roughing at 90IPM at 1.25" depth with 0.035" radial depth. Really great value.

Rick Fobear

02/24/2021

Great endmills

The 5 flute Haas endmills are great. Sizes are very consistent between each tool and they are the best endmills we used for cutting Inco 718.

03-0073

1/2" Dia. Carbide End Mill, 5 Flute, TiAlN Coated, 1/2" Weldon Shank x 1-1/4" LOC, Square Profile, HSPM2

DON’T FORGET ABOUT OUR

MILL TOOLHOLDERS

	Price
Quantity
Price

03-0073

1/2" Dia. Carbide End Mill, 5 Flute, TiAlN Coated, 1/2" Weldon Shank x 1-1/4" LOC, Square Profile, HSPM2

DON’T FORGET ABOUT OUR

MILL TOOLHOLDERS

Haas Delivered Price