DOWNLOAD AN INSTANT CUSTOM QUOTE FOR ANY HAAS MACHINE

Productivity Tools

Chip & Coolant Management

Make and Remove Chips Efficiently

Optimize Your Cutting Conditions

Parts come out best when the cutting tool is lubricated, the cutting zone is clear, and your machine is free of chips. We obsess over creating the optimal cutting conditions to produce perfect parts.

Coolant Options Overview

Haas offers a wide variety of coolant options to clear chips from your jobs, and keep your coolant topped up and in good condition. Check out this overview to discover the many choices available for your machine.

PROGRAMMABLE COOLANT NOZZLE (P-COOL)

Boost your productivity. Reduce cycle times. Eliminate all that opening and closing of the mill doors to adjust coolant lines. Our Programmable Coolant Nozzle is a multi-position nozzle that automatically directs coolant precisely at the cutting tool. The position of the nozzle is controlled via the program, and set specifically for each tool length – saving operator time by eliminating constant adjustments.

LEARN MORE

Different Chips, Different Solutions

How do Haas vertical machining centers keep your cutting tools lubricated and clear chips from the cutting area? This video shows all the ways Haas VMCs tackle these important tasks.

Not All Chips Are Created Equal

With more than 275,000 machines in the field, and more than 300 Haas machines in our own machine shop, there isn’t a chip-management issue we haven’t seen. And our solutions to those issues become features and options on Haas machine tools. Whether you cut steel, aluminum, high-temp alloys, or even non-metallic materials, there’s a Haas solution to suit your needs.

Chip Clearing

Re-cutting chips results in accelerated tool wear, poor surface finishes, and – at worst – scrap. To effectively remove chips from the cutting area, we offer a host of high-productivity solutions, like Through-Spindle Coolant, Through-Tool Air Blast, Minimum-Quantity Lubrication, and more.

Chip Removal

Your machine is one of the most important employees in your shop. It always should be making chips. Having to stop the machine to remove chips, means it’s not making you money. We offer a variety of chip-removal solutions to keep your machine making chips.

Coolant Management

Coolant management isn’t just about keeping up the coolant level, but also about keeping the coolant clean and that the coolant concentration remains optimal. Our solutions are the result of solving problems for our customers, as well as in our own machine shop.

Minimum Quantity Lubrication

Can’t use water-based coolant on your parts . . . but still need to keep your cutting tools lubricated? The Haas Minimum Quantity Lubrication System can help you out.

Coolant Refill

The Haas Automatic Coolant Refill System is designed to enhance your productivity, by simplifying the way you make coolant. We take all the calculation, chemistry, and mixing out of the process.

4 Steps to Coolant Maintenance

Follow along as Mark shows us a 4-step method for mixing new coolant to fill the coolant tank on your Haas CNC machine.

Programmable Coolant Nozzle

In today’s episode, Mark demonstrates several ways to set your Haas Programmable Coolant Nozzle (P-Cool), and reveals a couple of programming tips you probably didn’t know about.

Cleaning Your Tank

In this video, we look at cleaning out a marginally dirty tank, and then move on to a really dirty tank, and the steps involved in cleaning the machine’s entire coolant system when it’s been overrun by neglect and contamination.

Tools of Coolant

The first video in our Machine Tool Coolant Video Series takes a look at the tools most often used during the preparation of machine tool coolant and coolant tank maintenance.

Through-Spindle Coolant on Haas Machines

Take a look at how Through-Spindle Coolant makes a difference when machining. High-pressure coolant gets pushed up and through the spindle and out of the tool tip for maximum tool lubrication even in tight areas.

High Pressure Coolant

Put up to 300 psi of coolant right where you need it. Flush chips out from deep holes and increase tool lubrication, resulting in quicker cycler times and better finishes on parts.

Through-Spindle Coolant Challenge

See exactly how through-spindle coolant compares to traditional peck drilling. In this live Tip of The Day, Mark walks you through the benefits of drilling holes with through spindle coolant.

Get More from Your Haas Investment

Browse these available Chip & Coolant Management products for your machine.

Vertical Mills
Horizontal Mills
Lathes

Available on the following machines: :

What machine will you design today?

Build-&-Price

Your next Haas is waiting.